Nanobebe, トランジションボトル、ステージ2、ティール、3個入り、各8 oz (240 ml) (Discontinued Item)

¥3,448.20≈

  • Brands製造元 : Nanobebe
  • プロダクトコード Product Code: NNB-62854
  • UPCコード : 7290016628548
  • サイズ: 0.65 kg, 8.2x3.1x8.1 in
  • Availability: In Stock
購入
  • Because Nutrients Matter
  • Mimics Breastfeeding
  • For Instinctual Transition
  • BPA Free
  • Snap Closure Innovation
  • Support's Paced Feeding
  • 360º Venting System Designed to Reduce Colic
  • Soft Silicone Nipple
  • 4 Nipple Flow Rates Available
  • Easy to Clean & Dishwasher Safe
  • Breast Pump Adaptor Available
  • What's inside:

  • 3 x 8 oz /240 ml transition bottle
  • 3 x slow flow nipple
  • 3 x travel cover
  • 3 x storage cap
  • Familiar shape assists transition from breast to bottle and back.

    ご使用の目安

    Assembly Instructions:

    Step 1. Remove storage cap or nipple and ring prior to assembling the bottle

    Step 2. Simply push the bottle body into the base (do not attempt to twist shut).

    Holding the base and bottle body across from each other, simply push together. Or, place base on a flat surface and push bottle body down into it. 

    Preventing leaks - Make sure all edges are evenly aligned and flash tight.

    Freezing Breastmilk:

  • Pump directly into bottle
  • Seal with storage cap and place deep in refrigerator
  • Use the nanobebe adaptor to pour into storage bag and freeze
  • Seal with storage cap and place deep in refrigerator
  • After defrosting, pour milk into bottle
  • Warm your nanobebe bottle in a bowl filled warm water. Fluid level should not reach the nipple ring. Tilt the bottle gently to remove any trapped air underneath, then swirl the bottle inside the water until the desired temperature is reached.

    Always check the temperature of the milk before feeding your baby by dropping few drops on the inside of your wrist.

    Important Reminder:

    Storage cap must be removed from bottle prior warming.

    Replace with nipple and travel cover.

    Feeding:

    Mimic Breastfeeding - Thanks to its natural, breast-like design, the nanobebe feeding bottle makes it easier to combine breast and bottle feeding. When baby is crying and hungry, you can speed up prep time without exposing the breast milk to nutrients damaging temperatures.

    Hold this way to feed - Hold the bottle between your fingers and thumb. Make sure milk fills the nipple. With adult supervision, baby may hold the bottle while feeding.

    Disassemble:

    Step 1: Remove storage cap or nipple and ring prior to disassembling the bottle.

    Step 2: To disassemble your nanobebe bottle simply push down on the lip to release the base from bottle body.

    Cleaning and Sterilizing:

  • Before first use, disassemble all parts and sterilize in a bowl with boiling water for 5 minutes. Wash in warm soapy water and rinse thoroughly. Dishwasher safe.
  • It is recommended that the white silicone ring, located on your bottle body, be removed and cleaned after each use.
  • After each use, sterilize using a nanobebe Microwave Steam Sterilizer or in boiling water for 5 minutes.